Service Hotline
Products

Qingdao Mountain Plastic extruding Equipment Co., Ltd.
Add: Nanguan Industrial Park, Jiaozhou, Qingdao, Shandong, China
Mobile Phone: +86-13606307135
E-mail: info@shansu-china.com

news
You are here: Home > news > Content
Inspection items to ensure the normal operation of the packing belt production line
Edit:Qingdao Mountain Plastic extruding Equipment Co., Ltd.   PublicDate:2019-09-20

The use of packing belt production line has brought a lot of help to people, but some packing belt production line manufacturers, friends, in order to quickly run the packing belt production line, will not perform routine inspection on the packing belt production line, so it will cause problems. Production, then how do we operate the strapping production line?

The prerequisite for operating the strapping belt production line is that the first thing to pay attention to is the preparation. Before using it, you should carefully check what its equipment is, and see if there is any damage to its power supply. Then you need to prepare Good packaging paper, these are the issues we need to pay attention to. Secondly, it should be used in a standardized way. When using it, you should know its working principle and operating procedures.

In the process of use, the power should be turned on first, and the production line should be warmed up for a few minutes. In this way, the length of the strap can be adjusted well. After use, the power should be cut off to prevent it from leaking electricity. . Prerequisites for operating the strapping production line:

1. Preparation

First of all, we need to check whether the equipment and packing tape are inserted correctly, then check whether the power cord is damaged, then check whether the moving parts are lubricated, and then check whether the packing tape production line is fixed or not. Finally, we must prepare the outer packing paper.

2. Notes

In addition, it is particularly reminded that it is strictly forbidden to put your hands into the packing tape, and it is forbidden to disassemble the equipment and other dangerous actions during operation.

3. End of operation

After operating the packaging production line, remember to cut off the power and turn off the switch to prevent leakage and lead to electric shock.

4. Operating Specifications

The operator should have a basic understanding of the equipment structure, working principle, operating procedures, and adjustment methods. Before operating, turn on the power and let the strapping belt production line warm up for a few minutes. At the same time, adjust the length of the strapping belt. No noise, no abnormalities such as smoke, etc. Pack according to the thickness of the color box, instruction manual, or the quantity requested by the customer. After clearly identifying the quantity to be packed, wrap it with outer packaging paper, and then use the production line of packing tape to make bales. .

The packing belt production line has many advantages, such as saving labor costs, saving later energy consumption, improving production efficiency, and the quality of the produced packing belt is also better and the size is accurate. But everything must be operated in accordance with certain standards, and the operation of packing belt production line is no exception. Failure to operate the packing tape production line in accordance with regulations results in a series of problems such as loose coils, leakage, and even damage to the packing tape production line.

Qingdao Mountain Plastic extruding Equipment Co., Ltd.

Service Hotline

Mobile  E-mail:info@shansu-china.com

Address:Nanguan Industrial Park, Jiaozhou, Qingdao, Shandong, China  TelePhone:  MobilePhone:+8613606307135